Where to Use: Use Ames’® Blue Max® on Basements, Cellars, Foundations, Below Grade Walls, and Cisterns. Ames® Blue Max® is also an excellent coating for ICF (insulated concrete forms), as well as Metal, Wood, Concrete, and many other applications. Water-based, liquid applied, waterproof membrane. Easy and fast installation to foundation walls. Ideal for masonry, concrete, ICF, PWF foundations. Can be sprayed or trowel applied. The adhesive qualities in Ames® Blue Max® actually glues surfaces together and strengthens wall construction. Ames® Blue Max® outperforms isocyanate urethanes, and works well as a primer and waterproofing membrane for Ames® products such as Ames® Safe-T-Deck®, Ames® Snow Seal®, Ames® Maximum-Stretch®, Ames® Block & Wall® Liquid Rubber, Ames® Block & Wall® Acrylic, Ames® Iron Coat® and many other coatings. Ames® Blue Max® must be top coated for UV protection in exterior applications. Preparation: Be sure surfaces are clean and dry before the coating application. Read all label instructions before beginning. Always run a test patch first in an inconspicuous area to ensure that proper adhesion and drying occurs and the product works to your satisfaction. Caulk all cracks greater than 1/8″ wide with Ames® Blue Max® Trowel-Grade. Surfaces with joints, cracks, or where two unlike surfaces come together, require Ames® Peel & Stick™ Seam Tape (PS250, PS450 or PS650) to provide some additional strength and reinforcement. Prime all surfaces generously with Ames® Blue Max® prior to setting the Seam Tape in place. Apply a liberal topcoat of Ames® Blue Max® over the Seam Tape and allow to cure. Ames® Blue Max® does not need a primer. General Application: These are general application guidelines. Various factors including climate, condition and age of the surface factor into the application technique. That is why we offer a Toll Free Technical help line Monday to Friday. Please call with any questions before you begin your project – 1-888-345-0809. The surface must be clean, dry, and free of loose material. Fill all joints or cracks wider than 1/8 inch with Ames® Blue Max® Trowel Grade. It is important to seam tape all joints and cracks to avoid future cracking and leaking. Ames® Blue Max® may be brushed, rolled or sprayed. We recommend three gallons per 100 square feet for water containment. The application must be applied in a continuous, unbroken seal of a minimum dry thickness of no less than 30 mils (the thickness of a dime). Tools: Ames® Blue Max® can be applied with a paint brush, a push broom, a low nap roller with a long handle or a Commercial Airless Sprayer. In addition, you will need Ames® Peel & Stick™ Seam Tape and scissors or a utility knife. For larger commercial jobs. We recommend an airless sprayer with a 3/8 inch, 150 foot hose. ![]() Graco, Bulldog or Titan work well. Call for specific specification. Clean-up, Storage, and Disposal: Clean tools and small spills with water. Store unused product in its original container, tightly sealed and protected from freezing. Dispose of this product in accordance with local, state, or federal requirements. Weather and Drying Guide: Ames® Blue Max® is best applied between 50° to 90° F (10° to 32° C) on warm dry surfaces.
0 Комментарии
Оставить ответ. |
АвторНапишите что-нибудь о себе. Не надо ничего особенного, просто общие данные. Архивы
Март 2019
Категории |